How to Clean Skateboard Wheels – Cleaning Skateboard Wheels Guide

Sometimes skating on a sandy beach is fun, but it might dirty the skateboard wheels. The wheels catch dust, grease, wax, gum, wet paint, or any other item that makes it obscene. The structure of the wheels is highly complicated, so its cleaning is quite frantic. There’s no need to worry about it; here, we guide you on how to clean skateboard wheels. Cleaning the wheels will sufficiently improve the grip of the board.

How To Clean Skateboard Wheels – Steps Defined in Detail:

To get rid of all the problems that a skater can face while skating because of the dirty wheels, you need to follow the following method. There are several steps that a person can do at home which provide feasible cleaning of the wheels.

Step 1: Remove the Wheels

Firstly you need to choose a place because cleaning can create a mess. Then for cleaning, you’ve to take off the wheels first from the skater tool. For removal, you need to rotate the bearing at the proper angle of 45 degrees. Now, after taking out the bearing, clean and secure them. Lastly, take the wheels out that need to be cleaned.

Step 2: Soaking of the Wheels

Now the wheels that are removed need to be socked into the mixture of soapy water. Before soaking, the bearings should be removed from the wheels to prevent displacing them. Some of the dust particles might remain attached to the wheels that need to be removed. While soaking, clean the wheels by using a cloth.

Step 3: Wire Brush

After letting them dry, use the wire brush for further cleaning. This step should be performed very carefully as it is not easy. Hold the wheels under the warm running water and use the wire brush to clean the gunk. The soapy water should be used because it cleanses it readily.

Step 4: Drying

The most important part of cleaning the wheels is drying them out. The wheels are porous, so they attract more dirt which affects their smoothness. Before attaching them back to the bearing, make sure that they are completely dried. Well, wet wheels will destroy the bearing and cause rusting. Use the towel or clean cloth and let the wheels dry for several hours.

Step 5: Resembling

Lastly, you need to resemble your wheels carefully. It is done by rotating the wheels and attaching them back. After attaching the wheels with the bearing, attach the bearing with its beds. Assemble the wheels carefully for accurate results. Now your skateboard is all set for a ride. Enjoy!

I would recommend taking a look at Complete Guide to Clean Skateboard and Decks

Most Asked Question for Cleaning Skateboard Wheels:

Conclusion

The cleaned wheels provide a smooth flow of motion. If you feel a rough and harsh skating experience, it is all because of the dirty wheels, which need to be cleaned. By following the above-explained method, you can clean your skateboard wheels without any difficulty. Provide a new look to your skateboard wheels and enjoy the thrilling ride experience!

Read the guide to Buy Best Electric Skateboard Under 500$